設備特點
Equipment Features
該機主要用于鋁合金型材的圓孔、槽孔、鎖孔、異型孔等以及鋁型材的銑削、倒角、平面雕刻等工序的加工。
床身用重型鋼管焊接工藝以及床身兩端厚重鋼板加固支撐.經過時效處理.抗變形.增強床身穩定性。
工作臺面橫梁采用中段支撐機械結構，抗變形.預防橫梁下垂.加工精度高。
設立刀庫系統裝置.自行換取刀具加工效率高。
采用進口高速電主軸，噪音小，切削能力強智能化數控系統，操作方便快捷。
This machine is mainly used for the processing of round hole, slot hole, lock hole, special-shaped hole and the milling, chamfering, plane carvin and other procedures of aluminum profiles
The bed should be welded with heavy steel tubes and reinforced with heavy steel plates at both ends After aging treatment, the bed can resist deformation and enhance its stability
The mesa beam adopts the midde support mechanical structure, anti-deformation, prevent the beam sagging, high processing precision Set up the tool warehouse system device, self-exchange tools, high processing efficiency
Imported high speed motorized spindle, low noise, strong cutting ability
Intelligent NUMERICAL control system， easy and fast operation
主要技術參數
Main Technical Parameter
| 電功率 |
工作氣壓 |
主軸轉速/功率 | X/Y/Z軸加工行程 | 工作合工作位置 |
加工尺寸范圍 |
外形尺寸 |
| 380V50Hz12Kw |
0.6-0.8Mpa |
12000rpm/9kw | 4000/350/450mm |
-90° 0° +90° |
3200/350/450mm | 40030×1520x2360mm |
